Log in to Reply “I just ordered one of these. It dawned on me that we have some assemblies that don’t have onboard displays, but require me to set a calibration value in the on-board processor’s memory. I can plug the LCDterm into the ICSP header, and by adding a few li Max The Magnificent says: April 4, 2017 at 5:51 pm Log in to Reply “Their spec sheet mentions SETP and IGES mechanical models but no info on where to get them. And no mention of what the pinout is on the headers so you can wire it up…nnIt does look like a useful product for this purpose though.” Log in to Reply Log in to Reply A lot of embedded systems designers are focused on creating the underlying platform, and they begrudge the time and resources required to add a LCD user interface.The reason I mention this here is that I recently heard from the folks at LCDTERM.com about the launch of their new, programming-free LCD interface called LCDTERM (for “LCD Terminal”).LCDTERM supports two common interfaces — SPI and UART — thereby facilitating low-pin-count connection to pretty much any embedded platform requiring a user interface.Since product design simplification is the goal, LCDTERM includes 20 common fonts and all of the necessary control firmware on-board (you can add additional fonts and bitmap graphics, all of which can be displayed in 16-bit [65,536] color).LCDTERM is the small display (upper right) board that’s connected to a larger embedded platform (Source: LCDTERM.com) LCDTERM also boasts a speedy 32-bit ARM Cortex-M0 processor and is supported by a free API. The key point is that using LCDTERM does not require any LCD programming expertise or the time-consuming creation of special device drivers.In addition to the display itself, LCDTERM also includes a three-button keyboard, which allows you to implement a full user interface without having to worry about reading buttons, de-bouncing, or committing programming resources on your host embedded system.All you have to do is supply power (3.3V or 5V) and start sending commands. LCDTERM does the rest, which means you can be up and running and displaying data from your embedded system in a matter of minutes.In many cases, all you want to do is display a handful of words (and/or graphics) at appropriate locations on the screen. In this case, all you need to do is specify the desired locations — plus required attributes like font and color — along with the text you wish to display.One way to think about LCDTERM is as more of a dumb terminal than a traditional serial LCD display. Suppose you wanted to transmit a long string of words to a traditional serial LCD display. In this case, you would have to keep track of how many characters you’d used in order to know when to send special control codes to start a new line, and so forth. In the case of LCDTERM, you just specify your start location and start streaming text, which will automatically wrap and continue on the following line(s) as the text exceeds the width of the screen.I must admit that my initial reaction was along the lines of “Well duh; surely this sort of display is widely available,” but I thought I’d better check with some embedded designers in the trenches.First, I bounced it off my chum, Rick Curl, who responded that one of the products he designed recently employed a display that required him to write about 300 lines of code and to create his own font tables. In fact, I just called Rick on the phone and he mentioned a couple of very interesting points as follows:Like me, Rick is primarily a hardware design engineer who dabbles with software on an “as-needed” basis, so anything he can do to simplify the software side of things is much appreciated.Until a few years ago, most of the embedded systems Rick’s company created were for the American market, so they typically used simple alphanumeric displays. These days, they are addressing a worldwide market, so they now use graphic-capable displays in everything, even if — initially — they think they will only ever need to display a couple of lines of text.Next, just a couple of minutes ago as I pen these words, I wandered over into the bay across the hall to chat to the MaxVision guys who design rugged portable workstations. Some of these machines are beasts — one has six 24″ screens, 44 processor cores, 1TB of main memory and 40TB of removable storage — but the guys immediately said that they could think of lots of uses for the LCDTERM and that they wanted me to send them a link to this column as soon as I post it.I know that my survey sample was about as minimal as you can get, but the fact that everyone I asked — folks who I hold in the greatest respect — were so overwhelmingly enthusiastic tells me that LCDTERM may be of interest to a lot of embedded designers. Why don’t you bounce over to LCDTERM.com and take a look, and then come back here and post a comment to let the rest of us know what you think? Rcurl says: Continue Reading Previous Why software quality managers should consider ISO 9001:2015Next Harry Potter doesn’t code (but Murphy does) March 29, 2017 at 1:07 pm antedeluvian says: “Thanks for pointing that out Elizabeth. Used to be the Sales team would email prospective customers the latest User’s Manual and other collateral information. Both Step Models and User’s Manual are now on the DOWNLOADS page.nDD” “I like the serial interface, and the higher level commands, but for my money I would have preferred a 4th button. I did quite a bit of work with systems with hierarchical menus and it seemed that 4 buttons (up, down, back, & enter) was the minimum for rea Log in to Reply March 28, 2017 at 8:00 pm March 28, 2017 at 9:47 pm April 25, 2017 at 3:51 pm “Yes, we have larger versions as mentioned in some press releases, but they’re not production yet. Still being tested.nDD” elizabethsimon says: Log in to Reply “”…I did quite a bit of work with systems with hierarchical menus and it seemed that 4 buttons (up, down, back, & enter) was the minimum for reasonable user understanding of the system…”nnGenerally speaking I would agree that “the more buttons the antedeluvian says: antedeluvian says: April 25, 2017 at 3:48 pm Log in to Reply “This product is featured in the Product News section (P.7) of the April 2017 edition of Circuit Cellar. In it they say there are two larger versions 2.8″ and 5″. However there is no mention of these on the website.” ddina says: April 5, 2017 at 6:20 pm March 29, 2017 at 12:13 am “RicknnThat is a really good idea- I wish I had thought of that. Although on our production floor, it would really benefit from some kind of enclosure. Maybe we can find a some 3D printer drawings” ddina says: Share this:TwitterFacebookLinkedInMoreRedditTumblrPinterestWhatsAppSkypePocketTelegram Tags: Communications, Consumer, Industry, Solutions, Test & Measurement 8 thoughts on “Programming-free LCD user interface for embedded applications” Log in to Reply Leave a Reply Cancel reply You must Register or Login to post a comment. This site uses Akismet to reduce spam. Learn how your comment data is processed.
Showing: 1 - 1 of 1 RESULTS